How to Speed Up New Bitcoin Wallet Synchronization ...

QuarkCoin Cryptocurrency

Quark is a decentralized digital monetary system. It facilitates sending Quarks to Friends, Family Members Online Payments free of charges and charge-backs. Military Grade Encryption. No Bank or Government Control. Quark coins are based on the original idea of Bitcoin but improved, more secure, faster transaction times and zero fees. With improvements to design and security. There is also a greater coin supply with higher block rewards for miners. Quark is fully Open Source.
[link]

What are feasible ways to speed up wallet sync on Mac? (Bitcoin-qt 0.14.0)

submitted by k3rmit_fr0g to Bitcoin [link] [comments]

What are feasible ways to speed up wallet sync on Mac? (Bitcoin-qt 0.14.0) /r/Bitcoin

What are feasible ways to speed up wallet sync on Mac? (Bitcoin-qt 0.14.0) /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Help Speed up Bitcoin QT wallet syncing by seeding Torrent bootstrap.dat file

Help speed up Bitcoin QT wallet synching by seeding bootstrap.dat torrent file located here:
https://bitcoin.org/bin/blockchain/bootstrap.dat.torrent
submitted by r0nj0hn3 to Bitcoin [link] [comments]

Speeding up Wallet sync on Mac (Bitcoin-qt 0.14.0)

Is there any feasible way, that this mess does not take 3 weeks to sync? What should I do?
submitted by k3rmit_fr0g to Bitcoin [link] [comments]

Speeding up Wallet sync on Mac (Bitcoin-qt 0.14.0) /r/Bitcoin

submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

How I synced on a 2013 ultrabook in a few days

Note: I don't know exactly how long it took because I didn't do it in one go. I guess it was like 4,5 days doing it only at night. At some points(2015Q3, 2018Q2) it slows down and ETA goes up to 16 weeks or something.
The main bottleneck is IO. My 2013 mobile i3 has enough processing power to sync, I only used 3 threads and most of the time only one was close to 100%. The two directories that need to be written and read from intensively are chainstate and blocks/index. I pruned to 2GB and chainstate didn't go much over 3GB during the entire process. blocks/index is like 100MB.
The best solution is to move chainstate and blocks/index to a ramdisk. If you don't have enough ram the linux kernel has a thing called zram. Zram creates a compressed swap(cache) file in ram, this effectively increases your ram size at the cost of a bit of processing power and access speed(of the compressed part). On my machine I can net a bit more than 1GB of extra ram. That's right, with linux you can download more ram! The second best solution is to leave chainstate and block/index on a sdd. From what I've tested it should take up between 5 whole days and 2 weeks.
With regards to config, I didn't see much benefit in increasing the db cache over the default 450MB in bitcoin-qt. If I recall correctly, smaller prune sizes make chainstate larger.
After the initial sync keeping up to date is very easy on resources. You can catch up a week in a few minutes. At the moment bitcoind is using 400MB but I'm still working on bringing that number down.
Remember: If you want safety or if you want to help the network you need o run a full node. A full node is a node that verifies all transactions. A pruned node is a full node.
Edit: bitocoind really likes to hover around 400MB, sometimes it gets higher than that, some times it get's lower. A lot of that is data, not code, so if you start running out of ram your OS should drop those pages and get down to 250~300MiB. If you really want the memory to be this low all the time, on linux, you can either: Use cgroups to set the swappiness of the process to 99 so all data gets swapped but not code does; Use systemd and set MemoryLimit=300MiB(for example) so almost all data gets swapped but no code. I don't think any of those options are worth the small setup hassle.
submitted by nothing_works4me to Bitcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Is there any way to make an ABC node sync faster? Anything really?

This has been so painful to use that I'm likely killing it altogether. It has been for days on and off and I already had blockchain data from bitcoin core Qt stored up to mid 2017.
Now it is stuck syncing with the network in jan 2016 with an ETA of 11 days.
Anything to make this faster? Do -rescan -reindex do anything useful at all?
EDIT: I'm not a really "upgrade" guy so I never upgrade unless I need to, so I was still using windows 8.0 with a lot of "capped" stuff to improve security and speed. It so happens that one of the problems there was that windows 8.0 was NOT ending properly the client when closing it and I needed to manually kill it (also RAM handling was poorer). After some research I decided to upgrade to windows 10 (still possible to get for free even if you had a windows 8.0 license like mine for when it comes installed in your machine already - send a msg here if you want to know the best procedure).
Windows 10 properly handles ending the process, cleaning up RAM, and calling it back. Also, it seems to consume less resources to run ABC client. Just some hints here: windows 10 now uses PowerShell, not the old command shell, but PowShell does not accept commands such as -rescan -reindex as a default, so if you need to run a batch or start the client (or anything else like compiling c/c++ libraries, etc, etc) call cmd.exe instead, not worth the pain to read power shell documentation to execute pedestrian commands.
submitted by rdar1999 to btc [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

Transcript of Open Developer Meeting in Discord - 5/31/2019

[Dev-Happy] Blondfrogs05/31/2019
Hey everyone. I have opened the channel. So us peeps can talk :smiley:
Hans_Schmidt05/31/2019
Hello !
Tron05/31/2019
Hey all!
I've been on different high-priority project for Medici for last few weeks, but that should wrap up Monday and then I can spend more time on Ravencoin.
Thanks to Scotty for working on BlockBook which was needed for more wallets.
Hans_Schmidt05/31/2019
Good opening. I was going to ask- The last ravend/qt develop Github commit was on May 3rd. Can anyone comment on when work is planned to resume on?
Tron05/31/2019
@[Dev-Happy] Blondfrogs has been working tirelessly on Tags and Restricted Assets.
It is coming along nicely.
It is going to need lots of testing.
Just because there's been lots of changes.
[Dev-Happy] Blondfrogs05/31/2019
@Hans_Schmidt I have moved to my personal github with changes. You can check out my repo on the branch tags to view the latest commits
Tron05/31/2019
Topic: 12-words and time
One of the issues with 12-words on the mobile wallet is that it needs to scan the blockchain to find funds when recovering a wallet.
One proposed idea is to include additional info (optional) like a number that represents the number of weeks since Jan 3, 2009 to start scanning the chain.
Hans_Schmidt05/31/2019
@[Dev-Happy] Blondfrogs I looked at tags. tags last commit was 4/26. Is that correct?
Tron05/31/2019
Another proposal would be to use some of the bits in the 128 bits of entropy generated as a number (instead of entropy).
[Dev-Happy] Blondfrogs05/31/2019
yep. that is correct. I have been working on the Qt element of it, to hopefully aid with testing.
Great idea @Tron
Tron05/31/2019
Example: <96 bits entropy> + <32 bits timestamp>
Or <128 bits entropy> which is the seed and encoded into 12-words, and then a number like 5212 for how many weeks after Jan 3, 2009 to start scanning the chain. This would just speed things up.
Thoughts everyone?
Thoughts anyone?
[Dev-Happy] Blondfrogs05/31/2019
I love it.
Link05/31/2019
It seems a good idea.
ParabolicAssoil - HODL COACH05/31/2019
Pretty smart. I am wondering how Electrum handles it and why we can't use that method. I assume it doesn't work for assets?
[Dev-Happy] Blondfrogs05/31/2019
Most Electrum wallets are light wallets, and don't use the same syncing method that our breadcore wallet uses
Tron05/31/2019
Electrum doesn't work for assets.
Hans_Schmidt05/31/2019
Why does it have to be part of the word seed. Then you have to remember it like a key derivation path. Why not just have the gui ask at what date to start scan?
Tron05/31/2019
Either method of encoding would work and be compatible with any BIP44. With the extra number, you'd ignore it for Coinomi, or JAXX. With the encoding the time into the 12 words, there'd be no change, but you'd lose 32 bits of entropy. 4 Billion times less secure if you knew exactly when the wallet was created.
@Hans_Schmidt That's also an option.
ParabolicAssoil - HODL COACH05/31/2019
Thanks for the answers, gentlemen
Hans_Schmidt05/31/2019
The long term solution in bitcoin for faster more secure SPV is Neutrino protocol.
Tron05/31/2019
What's Neutrino protocol?
Hans_Schmidt05/31/2019
Complicated replacement for bloom filters but has some bitcoin-core pull requests already and being pushed by the Lightning folks.
Tron05/31/2019
Thanks. I'll read about it this weekend.
Hans_Schmidt05/31/2019
For what you need, a gui question is MUCH simpler
[Dev-Happy] Blondfrogs05/31/2019
So @Tron for the 12 words there are two options we are talking about.
  1. Using 12 words in addition to a timestamp to help the mobile wallets sync faster?
  2. Using some about of words and a timestamp to create the private key?
Is this correct>?
Both accomplish the same thing, just implemented in the different way. Faster sync for mobile wallets
traysi05/31/2019
What's the status on messaging?
[Dev-Happy] Blondfrogs05/31/2019
Messaging is complete, we are wrapping it up with the restricted assets release. I am currently buiding the QT gui elements needed for both restricted assets, and messaging.
Tron05/31/2019
@[Dev-Happy] Blondfrogs Yes. They do the same thing. One option potentially reduces security of the 128-bit seed. The other requires writing down an extra number that is optional. 12-words + [optional number] Where the [optional number] just clues in the wallet as to when to start syncing the chain without it having to reference an API.
[Dev-Happy] Blondfrogs05/31/2019
Thanks, If it was me, I would want to not change to many critical elements of the BIP44 protocol so that we can still utilize all current existing packages and libraries that support it.
Hans_Schmidt05/31/2019
Mobile sync- Stay standard Messaging- From what I could tell, at protocol level Message and Memo are the same. Is that correct?
[Dev-Happy] Blondfrogs05/31/2019
Yes.
Tron05/31/2019
Message and memo are the same. The only difference is how the message/memo is interpreted by the clients.
Hans_Schmidt05/31/2019
Thanks
Tron05/31/2019
A memo that is attached to a tx that sends back to origin (for an owner token) is a message that will be displayed by clients. If the client has some of that token.
Sminem05/31/2019
I just came here to say i love you all and keep it up. And also that we are all going to make it bruhs
Hans_Schmidt05/31/2019
Makes sense
𝕿𝖍𝖊 𝕯𝖔𝖓 𝕳𝖆𝖗𝖎𝖘𝖙𝖔 CEO ∞05/31/2019
i got my barber to my some RVN
i did my part
Tron05/31/2019
@Hans_Schmidt Messages make sense or that Sminem loves us all?
Sminem05/31/2019
both
Hans_Schmidt05/31/2019
Yup:smiley:
theking05/31/2019
I know there are a lot of moving parts right now, but what is the current ETA on restricted assets and tags going to testnet?
[Dev-Happy] Blondfrogs05/31/2019
Currently the protocols are complete. However, to make testing easier for the average user, we are working on basic Qt functionality before we will release.
I would say 1-2 weeks of development on the QT side, and we will be ready for testnet
Sminem05/31/2019
What is situation with dividends, i'm dumb
we had BW develop it but he cannot anymore due lack of time
Tron05/31/2019
We will need to re-assign it or do it next.
Sminem05/31/2019
sorry if it has been asked
okey
Tron05/31/2019
No, excellent question.
[Dev-Happy] Blondfrogs05/31/2019
I have been working with a member of the community that has been implementing dividends.
Sminem05/31/2019
nicee
[Dev-Happy] Blondfrogs05/31/2019
I will have more info on that next week
CryptokittyPizzaBoi JON.NETWORK05/31/2019
How is voting coming along?
[Dev-Happy] Blondfrogs05/31/2019
voting was pushed back in order to work on restricted assets.
So voting will be the next phase after testing of the latest build makes it to mainnet
Chill05/31/2019
Just wanted to randomly add that you all rock! It can't be said enough
theking05/31/2019
Awesome news on the timing @[Dev-Happy] Blondfrogs
[Dev-Happy] Blondfrogs05/31/2019
yes sir :smiley:
Any other questions we might be able to answer for you peeps?
Hans_Schmidt05/31/2019
I haven't tried to test tags branch (restricted) on testnet because that would be another fork in a sea of forks. A pre-gui messaging+restricted "official" release would be helpful
[Dev-Happy] Blondfrogs05/31/2019
Yeah, we can do that. I will work on that start this next week. and hopefully we can release testnet sooner.
Hans_Schmidt05/31/2019
Great.
Tron05/31/2019
Any tooling, or 2nd level stuff that's missing that is needed?
[Dev-Happy] Blondfrogs05/31/2019
There are a couple things missing that will help view data but all protocols and consensus should be working and testable
john mclaine05/31/2019
I just want to thank you, and tell you that my contribution will be to write an article in French detailing the entire RAVENCOIN project and its perspectives. IN CODE WE TRUST
[Dev-Happy] Blondfrogs05/31/2019
sounds good @john mclaine
I think we are going to call it for today everyone. Sneak in some questions if you have them in the next minute or so
Tyrantt05/31/2019
Hey guys, I've been around since late Jan 2017 and just want to say that you guys rock. I haven't been following as much lately since I've been busy with life, but was wondering if there is a guesstimation on when the roadmap will be completed
[Dev-Happy] Blondfrogs05/31/2019
Hopefully end of 2019. A nice little holiday miracle.
Daveatt05/31/2019
would be a nice X-mas present indeed. Thanks guys for your hard work. You guys rock
Tyrantt05/31/2019
Wow, that's sooner than I was anticipating. This is a great project and I'm glad that I took a leap of faith with it when I first heard about it. Keep up the good work :)
[Dev-Happy] Blondfrogs05/31/2019
Thanks everyone. Have a great weekend and keep spreading the word of CAAAWWWWWWW
We are out :smiley:
Chill05/31/2019
Best dev team anywhere
Sevvy (just wow)05/31/2019
:beers:
Tron05/31/2019
Thanks all!!!
Seal <:cricat:> Clubber05/31/2019
:bepbep:
submitted by mrderrik to Ravencoin [link] [comments]

Useful Beginner's Guide to Syscoin

What is Syscoin?

Some have described Syscoin (SYS) as the Shopify, Amazon and Ebay of the blockchain world. Syscoin is a revolutionary cryptocurrency that offers near zero cost financial transactions, incredible speed and provides businesses the infrastructure to trade goods, assets, digital certificates and data securely. Syscoin isn’t just about money and trading, it has the ability to attract various business types thanks to its native set of features geared towards business on the blockchain. From eBay traders and High Street shops to Medical applications, Insurance and Gaming, Syscoin’s decentralized network benefits everyone!   Syscoin is developed by Blockchain Foundry (BF). BF provides blockchain technology based services, projects and products for a wide variety of use cases with the stated aim of disrupting markets by leveraging the potential of blockchain technology. Syscoin is mainly known to be the first cryptocurrency to offer a fully decentralized marketplace based on blockchain. What is lesser known is that this is only a part of what Syscoin offers.   With the introduction of Masternodes in February or March 2018 SYS will be transformed from just a ’marketplace coin’ to a completely ‘utilitarian coin’. The Masternode infrastructure allows the addition of decentralized databases and file storage, increased transaction speed to surpass POS/Visa/Mastercard capabilities, true Turing complete smart contract capabilities for unlimited business logic, sidechains, application layers and an identity layer. This will all be accessible through an API, rather than a new language, enabling nearly any developer to create any blockchain application they can conceive. This will usher in the next generation of blockchain applications - made for new or existing businesses - by conveniently offering everything available from the blockchain space today. In simple terms think Dash + Ethereum/Lisk + Monero + Nano + Storj + Particl capabilities all in one coin!    

SYS Origin

The blockchain as conceptualized by Satoshi Nakamoto back in 2008 envisioned a peer-to-peer electronic cash network that would prevent double-spending. A year later, the blockchain became an integral part of bitcoin, serving as the latter's public ledger of transactions. Although Nakamoto's reference client mentioned a decentralized marketplace service, the subsequent implementation did not incorporate this due to a lack of resources.   Syscoin was initially described in a 2014 draft whitepaper that envisioned Decentralized Marketplace Creation, Decentralized Smart Contracts and Documents, Decentralized Certificate Issuance and Transfer, and Decentralized Data Storage and Retrieval, as among the services that it would offer upon its release.   Syscoin aimed to bring Nakamoto's vision of a decentralized marketplace back into the blockchain, among the other commercial-grade services it aims to deliver to clients. Other services that Syscoin plans to provide include secure data storage and transfer, and unique user aliases that link their owners to the services controlled by the alias.   The early Syscoin wallet was superseded by the release of Blockmarket Desktop 1.0 on September 12, 2017, marking the culmination of Syscoin's vision of a fully decentralized marketplace with a desktop GUI based on the blockchain.   The planned release of Blockmarket Web, a fully web-based version, and Blockmarket Professional in 2018 takes that vision one step further, as more advanced seller stores become a reality.    

The Team

The Team that NEVER quits! Before the launch of Syscoin (Q3 2014), there was a presale ICO by Moolah (as a partner), which turned out to be detrimental for Syscoin. The project raised around 1,000BTC for development but the Syscoin Team only managed to access 250BTC which were used for price support. Moolah (Ryan Kennedy) absconded with the bulk of the ICO funds and the Syscoin team were left with ~30million Syscoin at a price around 400 satoshi. Even after this tragic event, the devs didn’t quit and continued to work on the project without stopping. The case against Moolah is still on-going. See the article from CoinDesk here: http://www.coindesk.com/uk-court-syscoin-injunction-moolah-750-btc/.   What is this detail telling us about the dev team? While some crypto projects are just scams and bring little to no innovation, they’ve proven that they are in it for the long term - ably demonstrated by the fact that they continued to work despite their funds being stolen. And now that hard work is beginning to pay off with the entire team going full-time for the first time in January 2018 and new developers being hired following VC funding for BF.
View Team Page.    

Blockchain Foundry Products

BF Products    

What is Blockmarket Desktop?

Building on the World's First Decentralized Marketplace, Blockmarket is the newest generation of Syscoin's Desktop wallet with a complete, state-of-the-art marketplace built-in where you can securely and reliably buy and sell any items you wish. Entire stores can be created directly through the marketplace where you can sell your own products or re-sell others’ products for commission. Use of blockchain technology eliminates middlemen, credit card fees, maintenance fees, downtime and political interference. Persons are literally able to buy or sell anything to anyone, anytime, anywhere on Earth! Blockmarket Desktop was launched on September 12, 2017. Download Blockmarket Desktop 1.2    

Key Blockmarket Features

- Decentralized Marketplace

The marketplace platform provides a decentralized and high redundant channel for selling goods and services. Features include: • Price Pegging to currencies such as USD, EUR, GBP, CAD, CNY and BTC • Bitcoin and Zcash as payment options • Arbitrated Escrow • Encrypted Messaging • KYC/AML Compliance • Images • Unlimited Inventory Items  

- Name Aliases

Wallet addresses for cryptocurrencies generally consist of a unique string of between 27-34 alphanumeric characters. Such an address isn’t easy to memorize. Although the addresses can be added to an address book within the wallet, Syscoin has taken the user's convenience one step further, allowing you to create a unique Alias for your wallet address, such as a name, title, or characters specific to a username. These can be used to send SYS from home, to a mobile wallet, to work, to friends, to common suppliers or to repeat customers easily, without requiring any memorizing, writing it down, copy & pasting or emailing yourself the address.  

- Digital Certificates

Using the cryptography of the blockchain persons can issue, authorize, and exchange digital certificates of any kind. With Syscoin anyone can issue provably-unique certificates with text or ASCII content to one or multiple parties on the Syscoin blockchain. These certificates can be authenticated by anyone via Syscoin’s cryptographic proof of work. This allows for the creation and free exchange of any kind of digital asset such as ownership certificates, warranties, receipts, tickets, certifications, diplomas, software licenses and more.  

- Integrated Exchanges

Integrated Crypto exchanges - Flypme and Changelly will facilitate exchanging 30+ cryptos for SYS, directly within the Blockmarket wallet.  

- Security Audit Verified

Blockmarket was successfully and independently security audited by Digital Boundary Group and was deemed low risk. View Audit Results.    

Blockmarket Desktop – Quickstart Tutorials (16 short vids)

BM Desktop – Quickstart Tutorials    

Blockmarket Web – (The Key to Mass Adoption)

BM web will bring SYS’s existing decentralized marketplace and all its features into a web-based version, enabling ease of use with a simple email and password login (grandma friendly) without any need for downloading a wallet or waiting for sync. Blockmarket web will be launched in Q1 2018.   This launch will be accompanied by a marketing campaign roll-out that seeks to build brand recognition with audiences within the existing crypto ecosystem and more significantly with the broader, global, non-crypto audience. For this reason Ballistic Arts, a full-service marketing agency was retained by BF. BF Engages Marketing Agency    

Primary Target Market + Value Potential

The primary target market for BF’s Syscoin/Blockmarket web flagship is the retail e-commerce industry. This sets up their decentralized marketplace to rival such commercial giants as Amazon ($648B market cap), Alibaba ($453B market cap) and eBay ($43B market cap). According to eMarketer’s Worldwide Retail and Ecommerce Sales report, global retail e-commerce sales for 2017 were $2.3 Trillion. This is expected to reach an estimated $4 Trillion by 2020 reflecting the rapid growth within this sector.   To perform a very simple assessment of the Syscoin/Blockmarket web’s potential let’s assume that a 1% portion of the forecasted $4 trillion market is captured, which represents $40 billion in revenue. Assuming a sales to market cap ratio of 1:1 for simplicity, the circulating supply of 531 million SYS, with a $40 billion market cap yields a price of roughly $75 per coin. However, with masternodes that limit the circulating supply and token utility that extends beyond retail e-commerce, the SYS price could likely reach much higher. Please note that these are just very simple assumptions and projections for this exercise, however the real world driven potential that this project has is clearly evident.    

Key Syscoin Developments

- Z-DAG: Zero Confirmation Transactions with Double Spend Protection (WORLD’S FIRST)

View Developer’s Twitter post View Syscoin’s Twitter post  

- Masternodes

Ability for world-class transactions-per-second performance to scale-out with added nodes (theoretically 100k TPS per 1000 Masternodes, 300k TPS/3k masternodes, etc). In later releases, masternodes will also process smart contracts and facilitate sharded+encrypted offchain file-storage (with onchain anchors), among other touted functionality. They should also result in steadying the price movements - less volatility as holding will be incentivized.  

- Masternode Rewards + Min. Hardware Specs

Masternode Rewards + Min. Hardware Specs Masternode ROI Calculator  

- Smart Contracts

Scalable Ethereum Virtual Machine: Allows Turin complete smart contracts to be executed following the ethereum protocol at a much faster speed and at a fraction of the ethereum gas price.  

- Assets & Token Issuance

With its token issuance service, Syscoin allows anyone to create a custom asset token which can then be sent directly to anyone else on the network. This facilitates a variety of use cases including ICO token issuance, supply chain management, reward points, and loyalty programs.  

- Anonymous Transactions

Anonymous transactions: via mixing/shuffling at user-specified denomination. Afterwards, additional tech will be added in the near future which will further compound the degree of anonymity provided -Add ValueShuffle running on top of the masternode layer and you have the world's most advanced privacy tech in any coin. This brings true money fungibility to Syscoin and the missing link for true economic sovereignty. View Developer’s Twitter post.  

- Instant Send

Transactions can be sent and received instantly. This represents a similar sending capability as Dash, but is a step beyond- A type of backend node locking will allow an instantly received sum to be sent immediately, without delay, and without network risk of double-spend.    

Why Invest in Syscoin?

 

Merchants

Merchant Pilot Program    

Partnerships

Development Updates

White Paper

White Paper.pdf Note: It is anticipated that the whitepaper will be updated by the team in the near future due to recent developments    

Roadmap

Roadmap 2017-2018.png    

Blockchain Application Development Architecture

Blockchain Application Development Architecture.png    

Feature List 2017 & 2018

Feature List 2017 & 2018.jpg    

Where to Buy

BittrexPoloniexUpbitTux ExchangeLivecoinYobitAEXBittyliciousChangellyFlyp.me    

Wallets

• Block Market Wallet 1.2 – Windows and Mac. Download from https://syscoin.org/ • QT Wallet for Developers: Download from https://github.com/syscoin/syscoin2/releases/tag/2.1.6Coinomi – Syscoin MultiCoin Wallet (only supports send/receive)HolyTransaction – Syscoin Multicoin Web Wallet (desktop & android)    

Need Help or Want to Contribute?

If you need help for an important wallet issue or if you want to know how you can contribute in promoting Syscoin Join the Slack channel where the SYS team and community members are active, helpful and responsive.    

Credit To

Other Sources

https://syscoin.org/ https://twitter.com/syscoin https://www.blockchainfoundry.co/ https://en.wikipedia.org/wiki/Syscoin    

Last Updated

This post was last updated on Feb 10 2018.    

Disclaimer

This post was created particularly to aid those who are new to Syscoin. Please note that the content provided within this post is for information purposes only and is not to be construed as investment advice.
submitted by idbrews to SysCoin [link] [comments]

[dev] Dogecoin 1.10 IS OUT NOW. This is not a drill. You can tell by the lack of drilling noises

Yes, finally, after months of development and beating on it with hammers, Dogecoin Core 1.10 is out now: https://github.com/dogecoin/dogecoin/releases/tag/v1.10.0 - for Windows users you probably want to grab the setup-unsigned.exe versions (the .zip files are for anyone who just wants the binaries).
BACK UP YOUR WALLET BEFORE YOU UPGRADE. We've had zero problems with upgrades so far, but still, just to be safe.
You will have to reindex on first run of Dogecoin Core 1.10, which will take 2-3 hours. I suggest running it overnight. If you use the QT (graphical) client, it will prompt you to reindex. If you run the daemon, use the "-reindex" option when you launch to start the reindex process. Again, this only has to be done once while the index format is updated to add more sanity checks. Your wallet balance will reflect the blocks that have been reindexed, while the process runs, don't panic. Do not attempt to send coins while the reindex runs, however, or you may find you've sent invalid transactions.
This is a major update and a critical security update. If you use Dogecoin Core, you MUST update to 1.10 to remain secure. If you for whatever reason absolutely cannot update (i.e. cannot take a service down to reindex) you can use Dogecoin Core 1.8.3, which contains the most critical fixes: https://github.com/dogecoin/dogecoin/releases/tag/v1.8.3 . Even then, we highly recommend updating later if at all possible.
This release includes all of the changes in Bitcoin Core 0.9 and 0.10, including a huge speed boost to download/sync, a broad range of security fixes, and the framework for future improvements such as blockchain trimming and smart contracts (yes, you read that right, smart contracts).
If you're an individual user please update NOW. If you're a merchant, exchange, payment processor or service provider, please test and update as soon as possible. If you're a miner, please update after the 17th so we have time for the new client to be deployed. This update introduces version 3 blocks (BIP 66 for those who know what that is), which are part of the security fixes, and the more clients update before they're mined, the easier the rollout will be.
To re-iterate - seriously, you need to update. This client has been in testing for literal months, it's stable, there isn't another update just around the corner, get this one.
Lastly, for anyone who wants to run a Dogeparty wallet server (mostly this means coinwarp), there's a modified version of 1.10 with extensions to support Dogeparty wallets. Unless you need this version (i.e. someone tells you you need it), just get 1.10 from above instead. If you do need it, it's at https://github.com/dogecoin/dogecoin/releases/tag/v1.10.0-dogeparty.
submitted by rnicoll to dogecoin [link] [comments]

I tried to start mining years ago and still have bitcoin qt 4.8.3

I learned about bitcoin in 2011 and looked it up again in 2013..I downloaded bitcoin qt amd tried to set up a miner the first time using my laptop...that laptop quit workimg a few years ago but I just got the wallet off of it and pulled it up..I am trying to sync the wallet now and it looks like I may have messed up and its empty. Also it is takng forever to sync..I have read some info on speeding it up but I am still learning and not great with how to do even some basic stuff..my address has changed three times. It is now 1M1bg9YHKFEW3emPX9rXaCb4FcxJqTQwwm...is it even worth messing with and trying to run a full node or anything? Again very new and learning.
submitted by detro10 to BitcoinBeginners [link] [comments]

Ravencoin Open Developer Meeting - 2/15/2019

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:02 PM
Hello everybody!

theking - Last Friday at 2:02 PM

Seems likes it’s been so long since this meeting was held. At least a month 📷

Tron - Last Friday at 2:02 PM

Hi all!!!

Tom - Last Friday at 2:02 PM

Big boss is here !(edited)

BigZim - Last Friday at 2:03 PM

Oh hi

theking - Last Friday at 2:04 PM

Hi @Tron

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:04 PM

Topics for today: Release 2.2.2, Mobile Wallet, Restricted Assets, SLC Raven Meetup📷1

truedev - Last Friday at 2:05 PM

hello

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:05 PM

Release 2.2.2 GO

J. | ravenland.org - Last Friday at 2:05 PM

Hey

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:05 PM

BTW, blondfrogs won't be able to join us today. 📷

corby - Last Friday at 2:05 PM

Hi all

Chatturga - Last Friday at 2:05 PM

Blondefrogs has been working on the 2.2.2 update. He isnt here today, but he left this tidbit for the meeting:(edited)"Release 2.2.2 has a bunch of new updates. The sync speed fix that was released in 2.2.1 has been updated even more to use less memory/ram and uses less CPU. Each node used to hold all addresses that contained an asset as well as the amount in those addresses. That is now optional with the -assetindex flag. Which can be put into the raven.conf or added as a parameter when starting the wallet. Some other wallet issues were also fixed with this memory update. This is considered an mandatory update, especially if you haven't updated to 2.2.1 which resolved a potential fork bug fix. I would still suggest updating to 2.2.2 even if you are on 2.2.1."📷6

Jeroz - Last Friday at 2:07 PM

wen source?📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:07 PM

There's a PR that was just moved to Develop.When is now

Jeroz - Last Friday at 2:08 PM

great 📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:08 PM

It'll be merged by the devs to master and then binaries should be posted soon

truedev - Last Friday at 2:09 PM

any idea when dividends will be functional?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:09 PM

A bunch of testing has been happening and is currently running on the seed-nodes.

Tron - Last Friday at 2:10 PM

No timeline for dividends, but it is the one function that doesn't need any changes to consensus. And it can be done on tier 2 with a python script. The plan is still to build in a rpc call.📷2

truedev - Last Friday at 2:11 PM

alright

SpyderDev - Last Friday at 2:12 PM

We have been focusing on sync performance and have been running many tests. I've added an image of the results of this testing. Currently we still want to work on getting the Windows QT sync times faster (at least closer to what they are using just ravend). Overall we are very happy with the speeds and hope it will help people that have struggled getting their nodes up to date.(edited)📷

Jeroz - Last Friday at 2:13 PM

Yeah that table completely puzzled me

[Master] Roshii - Last Friday at 2:13 PM

hello!📷6

Jeroz - Last Friday at 2:13 PM

Fast branch is 2.2.1? or 2.2.2? Develop branch is 2.2.0?

SpyderDev - Last Friday at 2:15 PM

Sorry, should have clarified that. I was testing while it was still under development. On the table the top is the new-sync code, the bottom is the old "assets" release. As of about 5 minutes ago all of this code is on the develop branch.

Jeroz - Last Friday at 2:15 PM

Although syncing is mostly bottlenecked by cpu speed, that 16 core windows-qt still looks off to me. I synced windows Qt using 2.2.2 in ~2h on a i5-7600K.ok

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:17 PM

Okay, we good to move to the Mobile update?

SpyderDev - Last Friday at 2:17 PM

The Windows box is an AWS instance and there is some concern that the remote desktop could be slowing the QT UI down causing the horrible sync times. I am working on getting a local Windows 10 resource and will have updated information once that is ready (early next week).

Jeroz - Last Friday at 2:18 PM

ah that might explain. Ubuntu qt was 45 mins for me

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:18 PM

CoolOkay, Mobile!Go!

[Master] Roshii - Last Friday at 2:18 PM

📷📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:19 PM

@[Master] Roshii has been working closely with some of the other devs to get the iOS version out the door.Android will follow closely.

Jeroz - Last Friday at 2:20 PM

is android an easy port?

J. | ravenland.org - Last Friday at 2:20 PM

Usually its the case(?), i mean easier 📷(edited)

SpyderDev - Last Friday at 2:20 PM

Just copy and paste right Roshii 📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:20 PM

LOLNo, usually its a completely new development effort.For the RVN Wallets they are both written in native iOS/Android code.

[Master] Roshii - Last Friday at 2:21 PM

So the iOS and Android use the same Core SPV module written in C, and it's the most difficult part.I have already did some work when it comes to Android, and it's 70% finishedHave also to port all the changes we lately did to the iOS wallet ...

boatsandhoes - Last Friday at 2:21 PM

yeah, unfortunately its not as easy as cut and paste for ios to android

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:21 PM

Anybody interested in installing the TestFlight version and helping us test?

boatsandhoes - Last Friday at 2:22 PM

yes

J. | ravenland.org - Last Friday at 2:22 PM

For android? sure.

BW__ - Last Friday at 2:22 PM

Android? yes.(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:22 PM

I'll talk to Apple about adding Android support to TestFlight.Might be a while.

J. | ravenland.org - Last Friday at 2:22 PM

lol

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:22 PM

Anybody on here using iOS?

Jeroz - Last Friday at 2:22 PM

Yeh me

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:22 PM

besides me...

[Master] Roshii - Last Friday at 2:23 PM

Android is very close, fortunately I'll have enough coffee in Morocco to finish the wallet in two weeks.(edited)📷4📷5

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:23 PM

https://testflight.apple.com/join/NTVQ2FfY (400 installs available)Join the RVN Wallet betaAvailable on iOS📷

theking - Last Friday at 2:23 PM

I will test iOS if needed

[Master] Roshii - Last Friday at 2:23 PM

@shiny

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:24 PM

Some of the devs have been doing a bunch of testing on iOS but we would love others to help.Bugs can be reported on GitHubhttps://github.com/RavenProject/ravenwallet-iosGitHubRavenProject/ravenwallet-iosContribute to RavenProject/ravenwallet-ios development by creating an account on GitHub.📷

truedev - Last Friday at 2:25 PM

how confident are you that apple will allow it on the appstore

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:25 PM

It's already in the App store.

truedev - Last Friday at 2:25 PM

ok

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:25 PM

That wasn't easy though.

truedev - Last Friday at 2:26 PM

yah figured, a lot of coins have been completely rejected(edited)

Chatturga - Last Friday at 2:26 PM

The devs already jumped through Apples 152,315 flaming hoops to get it in there.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:26 PM

Yup, many meetings and phone calls.

J. | ravenland.org - Last Friday at 2:26 PM

wen rvn modular phone

Jeroz - Last Friday at 2:27 PM

Looking good📷📷7

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:28 PM

Okay, any questions about iOS release?

jaysonb - Last Friday at 2:28 PM

seed word format changed? i seem to have to have same words. did i need to delete and install fresh?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:29 PM

No, it used your old ones.Always have your 12 words. especially when testing.

ravencoin maximalist 🧘🏻♂ - Last Friday at 2:30 PM

I’ve got iOS

Tron - Last Friday at 2:30 PM

If you use your 12-words, and then sync, and you're missing funds. Go here: https://medium.com/@tronblack/ravencoin-testing-ios-wallet-b713deb2c800MediumRavencoin — Testing iOS Wallet – Tron Black – MediumThank you for helping us test the Ravencoin iOS mobile wallet. Since you are in an early group of testers, you might have used the…

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:30 PM

Sweet, install and report bugs.

Tron - Last Friday at 2:30 PM

Or just go there...

jaysonb - Last Friday at 2:30 PM

that article scared me so i moved everything off.but i'll put some back on now

ravencoin maximalist 🧘🏻♂ - Last Friday at 2:31 PM

📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:31 PM

That's unfortunate. You don't need to be scared ever if you have your 12 words.

[Master] Roshii - Last Friday at 2:31 PM

android current state(edited)📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:32 PM

Here's the install link one more time for those that have joined late: https://testflight.apple.com/join/NTVQ2FfYJoin the RVN Wallet betaAvailable on iOS📷Okay, Tron's topic: Restricted Tokens

Tron - Last Friday at 2:33 PM

I have an idea.(edited)📷7📷6

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:34 PM

That several other devs have helped with. 📷

Tron - Last Friday at 2:34 PM

📷

SpyderDev - Last Friday at 2:34 PM

and lawyers

Tron - Last Friday at 2:34 PM

When the project started, ICOs were the big thing. Now it is STOsThe main difference is the legal wrapping and rules around securities.If Ravencoin has two more token types (Tags and Restricted Assets), there are lots of ways to make compliant tokens.Importantly, it doesn't affect the existing tokens at all.Tags - Tokens that can be sent only by the issuer once (with metadata).These tokens start with (hashtag)(edited)📷8

SpyderDev - Last Friday at 2:37 PM

^(octothorpe)

Tron - Last Friday at 2:37 PM

The Restricted Assets start with $, and can be frozen by the issuer. But they only move between tagged addresses.(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:38 PM

Tags can be sent to a user's address after the issuer has done the necessary due diligence for an STO issuance.(edited)

Tron - Last Friday at 2:38 PM

The issuer determines which tags the Restricted Asset will honor.This can be used for lots of different use cases.

EEE - Last Friday at 2:38 PM

Stunning interface guys

boatsandhoes - Last Friday at 2:39 PM

will that determination be a setting in the wallet?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:39 PM

Restricted assets can then only be sent to addresses that are allowed and have the proper Tags.

boatsandhoes - Last Friday at 2:39 PM

interesting📷1

J. | ravenland.org - Last Friday at 2:39 PM

Did you guys get contacted by some entity* whos forcing the restricted address policy? or is this done as precautionary measure? At first glance your idea sounds good Tron.(edited)

Tron - Last Friday at 2:39 PM

Example: $UBER token only moves among addresses tagged with #KYC

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:40 PM

So Ravenland will have to buy a bunch more spam tokens.📷4

SpyderDev - Last Friday at 2:40 PM

#ravenland.

boatsandhoes - Last Friday at 2:40 PM

so is the $ something that can be added to an existing asset?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:40 PM

It's not a forced thing. But adding the ability for Raven to be used in new use cases where legal requirements exist.

Tron - Last Friday at 2:40 PM

Not contacted by anyone, and not precautionary. Ravencoin Assets are just tools. This is just another tool that will help issuers of security tokens.📷9📷4

BW__ - Last Friday at 2:41 PM

Love it.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:41 PM

It'll be a new token type that you can create @boatsandhoes📷1

ravencoin maximalist 🧘🏻♂ - Last Friday at 2:41 PM

That sounds awesome

SpyderDev - Last Friday at 2:41 PM

I for one am very excited about this...📷4

Hans_Schmidt - Last Friday at 2:41 PM

How does the $ token owner specify the required # tags?

DeejayQQ - Last Friday at 2:41 PM

Can the same name have different token type?Sorry need time to digest

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:42 PM

Still working out the details. Tron will be posting additional info about the idea soon.

Steelers - Last Friday at 2:42 PM

Cool

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:42 PM

Feedback is wanted!

Tron - Last Friday at 2:42 PM

Q: Was this originally the plan for Ravencoin? A: No. This is in response to the regulatory ramp up in 2018 in some jurisdictions which requires that only known individuals or entities to operate peer-to-peer on certain tokens. For jurisdictions that allow unrestricted peer-to-peer transfer, we strongly encourage use of the original Ravencoin assets. The Restricted Assets are an adaptation to satisfy burdensome, privacy-destroying regulations, with a goal of reducing information replication which makes Ravencoin Restricted Assets a better alternative to those being promoted now.

jaysonb - Last Friday at 2:43 PM

all nodes will validate the transactions not just those interested in the transaction - i assume all will validate..

boatsandhoes - Last Friday at 2:43 PM

so essentially any name already secured in the hopes of having that functionality are worth less because they wont be able to?

theking - Last Friday at 2:44 PM

Can the restricted assets be time based in any way? For instance, in some STO regulated environment, there is a lockup for some period of time after issuance, but then after a certain period of time the restriction goes away and the securities can be traded. Is that contemplated at all?

DeejayQQ - Last Friday at 2:44 PM

If I already have Tron as my asset, there could be another Tron but under a different token type such as restricted assets?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:44 PM

Yes all nodes will do consensus checks.

corby - Last Friday at 2:44 PM

@boatsandhoes there's going to be a grace period where you can purchase $XXX if you own XXXon the order of months

boatsandhoes - Last Friday at 2:45 PM

📷 📷 📷 📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:45 PM

Yes, you have the TRON asset and you can also have the $TRON asset.(edited)

Tron - Last Friday at 2:45 PM

Regarding the lockup....

boatsandhoes - Last Friday at 2:45 PM

how many RVN for that?

Tron - Last Friday at 2:45 PM

Rule 144 under the Securities Act of 1933 This is an important rule to be aware of in terms of privately held securities. This rule provides the most commonly used exemption for holders to sell restricted securities (Note: For context, a restricted security is a security sold in an exempt offering, except for Reg A+). The general idea is that you can publicly resell your “restricted” (privately sold) securities only when the restricted legend is removed. The solution Ravencoin Restricted Assets provides is the ability for the Iissuer to Freeze the asset ininto the holders account. The qty will be visible, and the frozen status will be visible. The meta-data for a Freeze can specify 144_Restricted. The issuer can Unfreeze to release the 144 restriction.Similar for Reg D 1-year lockup.@theking

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:46 PM

@theking ^^

DeejayQQ - Last Friday at 2:46 PM

What is the timeline for this restricted asset to be implemented?📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:46 PM

No timelines yetStill in the ideation phase.

SpyderDev - Last Friday at 2:46 PM

Fresh off the press...

DeejayQQ - Last Friday at 2:46 PM

Ok, idea for nowGot it

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:46 PM

Wanting input for the idea.

boatsandhoes - Last Friday at 2:47 PM

a preset for lock up settings would be nice

Jeroz - Last Friday at 2:47 PM

What about the ability to move an asset from restricted to unrestricted after grace period similar to the reissue ability? By the issuer(edited)

boatsandhoes - Last Friday at 2:47 PM

adjustable preset*

DeejayQQ - Last Friday at 2:48 PM

If this restricted assets would help underlying token listed on exchanges for trading by satisfying the legal requirements, I don’t see why not. There are only benefits📷2

boatsandhoes - Last Friday at 2:48 PM

yeah, win win

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:48 PM

There is something similar in vote tokens.

corby - Last Friday at 2:48 PM

@Jeroz the issuer would be able to "reissue" and relax restrictions

DeejayQQ - Last Friday at 2:48 PM

Just throwing things out here. Can we just make all existing tokens crested so far restricted assets?*created

boatsandhoes - Last Friday at 2:49 PM

stupid question, is it possible to have burned rvn cost for the $ to add onto the block reward as a bonus?(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:49 PM

No, @DeejayQQ there should be both usecases available in the platform.

corby - Last Friday at 2:49 PM

We (my dog and I) are envisioning a differentiated space where we can charge a lot more RVN to keep non-serious people out..(edited)

Tron - Last Friday at 2:49 PM

@Jeroz Yes, as long as the asset is still "reissuable", you could change the logic from (#KYC & #ACCREDITED) to just #KYC📷3

Jeroz - Last Friday at 2:49 PM

I'm just worrying about the name uniqueness if you can have #BANANA and $BANANA

BW__ - Last Friday at 2:50 PM

Is it fair to assume that tags can be standardized for specific purposes? If so, should we create something akin to an 'ERC' in git repo?

Jeroz - Last Friday at 2:50 PM

@Tron sounds cool

truedev - Last Friday at 2:50 PM

honestly, I think you should be able to buy/create an asset in a set, with all types(edited)

boatsandhoes - Last Friday at 2:50 PM

^that part

Hans_Schmidt - Last Friday at 2:51 PM

Since the #KYC tag is just locked to an address, what prevents someone from selling their address and thereby the KYC?

corby - Last Friday at 2:51 PM

The "#" types won't trade -- they're just stamps to stamp addresses as qualified-to-hold-some-stuff..

Tron - Last Friday at 2:51 PM

The tags are created by the users. The system is still jurisidiction agnostic.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:51 PM

@Hans_Schmidt nothing really, the same thing as selling your username password to any other existing financial app account.

corby - Last Friday at 2:51 PM

@Hans_Schmidt Real world networks, high cost of entry (for serious applications)For non-serious applications, nothing

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:51 PM

You still have the liability associated with that account though.

Jeroz - Last Friday at 2:52 PM

@corby what about BANANA/ vs $BANANA/ ?Or do you want to make them subassets?

boatsandhoes - Last Friday at 2:52 PM

@Jeroz better safe than sorry, just swoop both

Tron - Last Friday at 2:52 PM

A country could require that #SOMECOUNTRY tag has to exist before moving $SPECIALASSET to an address. The users set the rules. #KYC was just an example because it is an industry problem at the moment.

corby - Last Friday at 2:52 PM

#BANANA, $BANANA, TRICYCLE, and BANANA can all coexist just fine I think..

theking - Last Friday at 2:53 PM

Thanks @Tron. This is great and I think something that will enable raven to become an even more widely used platform.📷4

Tron - Last Friday at 2:53 PM

That's the hope. I think it solves some real problems that the industry is trying to solve through incompatible ERC-20 experiments.📷3

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:54 PM

/hacks📷3

boatsandhoes - Last Friday at 2:54 PM

what is the purposed cost for $ in addition to an existing asset?

corby - Last Friday at 2:54 PM

People that own #THESE I am calling "Qualifiers" -- they just stamp their mark on addresses. Issuers of $THESE need to establish trust with #THESE and #THOSE and then decide what restrictions to apply.📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:54 PM

5 mins left. Stay on this topic or switch to meetup?

Tron - Last Friday at 2:55 PM

@boatsandhoes Not determined.

Jeroz - Last Friday at 2:55 PM

yeah the idea is a nice proof of ownership / membership

DeejayQQ - Last Friday at 2:55 PM

Meetup

Chatturga - Last Friday at 2:55 PM

TL;DR - The SLC meetup is in 1 month. Go to https://www.meetup.com/Salt-Lake-City-salt-lake-city-Meetup/ to indicate if you plan on attending so that we have a somewhat accurate headcount.MeetupSalt Lake City Ravencoin (Salt Lake City, UT)Ravencoin is a blockchain and platform optimized for transferring assets, such as tokens, from one holder to another, and is built on a fork of the Bitcoin code. It is intended to prioritize security,📷

corby - Last Friday at 2:55 PM

@boatsandhoes One Million Raven

Chatturga - Last Friday at 2:55 PM

Punch and pie

J. | ravenland.org - Last Friday at 2:56 PM

Can the SLC meetup made interactive for people that cant make it there?

theking - Last Friday at 2:56 PM

What about having just one name ( you first buy the standard raven token under whatever name you like) and then the holder of the owner token is the only one to create restricted tokens ? Might be some way to ensure no name confusion.📷4

boatsandhoes - Last Friday at 2:56 PM

what about that block reward bonus concept for purchasing $. would that work?

Chatturga - Last Friday at 2:56 PM

I dont know that we have the ability to make it interactive as far as Q&A goes, but I'll look into it. We should have it live streaming. @J. | ravenland.org(edited)📷2

BW__ - Last Friday at 2:56 PM

@Tron Is there same kind of logic layer to restricted assets?(edited)

Tron - Last Friday at 2:57 PM

@theking I like that idea.

Jeroz - Last Friday at 2:57 PM

Quick question that is offtopic but I think deserves an answer because it was asked a couple of times earlier this week: Will unique assets get a reissuable function? To change IPFS.(edited)📷2

Tron - Last Friday at 2:57 PM

@BW__ Yes. Simple and, or, not and parenthesis - limited in length.(edited)

boatsandhoes - Last Friday at 2:57 PM

@theking thats a good idea

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:58 PM

@Jeroz There is not a way to do that currently.

BW__ - Last Friday at 2:58 PM

@Tron That makes sense. Thank you.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:58 PM

Just make sure your changes to the information have the same hash as the previous data and your golden. 📷📷1

Jeroz - Last Friday at 2:59 PM

Any plans on changing that, perhaps when introducing new types of assets?

boatsandhoes - Last Friday at 2:59 PM

i like that it cant be changed

corby - Last Friday at 3:00 PM

Thanks everyone!

theking - Last Friday at 3:00 PM

@Tron there was some info floating around about a 2nd later KYC solution ( from your recent podcast w Crypto Koala). Is that a separate solution someone is working on or part of this new concept?📷1

Tron - Last Friday at 3:01 PM

Starting with the introduction of messaging, every transaction can have an IPFS hash. Can be used as an public invoice, details about the transaction, etc.@theking The same new concept.

[Master] Roshii - Last Friday at 3:02 PM

Ok, we're done.

Steelers - Last Friday at 3:02 PM

How would Raven handle for instance a stock split?

BW__ - Last Friday at 3:02 PM

Are there sync concerns if a restricted asset logic layer is added?

Tron - Last Friday at 3:02 PM

@theking The KYC provider would store the KYC info, and send the Tag to an address with meta data that specifies that they're holding the KYC data. The KYC data would not be public, but could be audited.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 3:02 PM

That way you could update information about the original unique asset with each transaction.@Steelers Just a simple re-issue of the asset

Tron - Last Friday at 3:03 PM

@bw_ The logic layer is only a small db that stores the meta-data about the Restricted Asset, and enforces the restriction in the consensus rules. Rule returns true/false.(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 3:03 PM

Thanks everybody! I have to run.

Jeroz - Last Friday at 3:04 PM

I'm looking forward to the discussions to let this take shape. Thanks all! 📷📷4

Tron - Last Friday at 3:05 PM

@BW__ It would work very similarly to the way the units works now. Each asset has number of units and any transaction that makes it too granular (more satoshis) will fail in consensus -- even if it gets past the RPC checks.Signing off. Thanks all!!!📷9📷4📷9
submitted by Chatturga to Ravencoin [link] [comments]

Ravencoin Open Developer Meeting - 1/4/2019

[14:04] Hi everyone! [14:04] :dabbitwave: [14:04] Hey Everybody! [14:04] Hello 😃 [14:04] Sorry we're getting started a bit late. [14:04] Topics: SLC Meetup (March 15th) [14:04] 👋 [14:04] Roadmap breakdown - posted to github [14:05] IPFS (integration) [14:05] greetings 👋 [14:05] So, SLC Meetup on the 15th! [14:05] Great! [14:05] Hi! [14:06] Hi all — a special thanks to the developers and congratulations on an amazing first year!!! # [14:06] <[Dev] Blondfrogs> Hello Everyone! [14:07] We have a tentative agenda with @Tron , @corby speaking. [14:08] We would like to have nice walkthrough of the Raven DevKit for the meetup. [14:08] We are planning on hosting a meetup in SLC at the Overstock building on March 15th from 6:00pm-9:00pm. It is free admission, but there is a page on meetup.com where people can rsvp so that we have a somewhat accurate headcount for food. [14:08] sup guys [14:08] hey russ [14:09] We are planning on having a few speakers and have allotted a bit of time at the end for people to meet and greet each other. [14:09] can you guys link us to the page somewhere when thats available? 😄 [14:10] free food?! [14:10] todays topic? [14:10] yeah can we indicate pepperoni pizza [14:10] Sounds good to me @Jeroz Nothing ordered yet though. 😃 [14:10] only pepperoni pizza is served at true blockchain meetings right [14:10] :blobhide: [14:10] Absolutely. The itinerary just needs to be finalized and then I'll make a broad post about the rest of the details. [14:11] https://www.meetup.com/Salt-Lake-City-salt-lake-city-Meetup/ [14:11] 😭 so far away [14:11] West Coast! [14:11] @MTarget But there's pizza, so worth the travel time. [14:11] lol [14:12] I'll be watching the stream if its available since i'm from montreal/canada 😛 [14:12] Ah yes, I love $300 pizza 😉 [14:12] as long as I get to see your smiling faces @Tron @RavencoinDev then it's worth the time [14:12] We'll be there. [14:12] We'll be messaging additional details as they get finalized. [14:12] Greeting and salutations! [14:12] sup [14:13] Hey, $300 is considerably cheaper than 2 $3,700,000 pizzas. [14:14] Ok, switching topics... [14:14] yeah its a way to fly, [14:14] question is whether those piza's will be paid for in RVN coin or not :ThinkBlack: [14:14] Roadmap [14:14] It hasn't changed, just added some detail. [14:14] https://github.com/RavenProject/Ravencoin/tree/masteroadmap [14:15] nice [14:15] This now links to a breakdown for messaging, voting, anti-spam, and rewards (dividends) [14:15] will there be any additional RPC functionality coming in the future, thinking in terms of some functions that are only available in ravencore-lib [14:15] apologies if now is not time to ask questions, i can wait for later [14:15] "Phase 7 - Compatibility Mode" - that's new 😮 [14:15] The protocol for messaging is pretty well established, but the rest isn't in stone (code) yet. [14:16] can you give us details on compatibility mode? [14:16] In broad brush strokes. [14:17] The idea is to allow ravend to act as a daemon that looks like a single coin. [14:17] so ravend that only works with the bitcoin asset? [14:18] interesting [14:19] So you start it with an option to only work with a single asset/token account or something? [14:19] hmm compelling what is the reason for this? some kind of scale or performance? [14:19] ^ [14:19] Example: Configure ravend to listen for transfer RPC call for senttoaddress or sendfrom, but for a specific asset. This would allow easy integration into existing system for assets. [14:20] Only the daemon or the whole wallet UI? [14:20] yeah thats great, rpc functions dont allow us to do this yet, if i recall [14:20] or at least we depend more on ravencore lib [14:20] so like asset zmq [14:20] that's smart [14:20] @Tron it also sounds like it makes our life easier working with RPC, instead of core all the time for some functionality [14:21] if i understand correctly anyways [14:21] So you could run numerous instances of ravend each on their own network and RPC port, each configured for a different asset. You would need some balance of RVN in each one to cover transaction fees, then. [14:21] id be curious to know what all the advantages are of this [14:21] one more question, how would i decentralize the gateway between bitcoin mainnet/ravencoin mainnet? in the current RSK implementation they use a federated gateway, how would we avoid this? [14:21] it sounds neato [14:21] Just the daemon. The alternative is to get exchanges to adapt to our RPC calls for assets. It is easier if it just looks like Bitcoin, Litecoin or RVN to them, but it is really transferring FREE_HUGS [14:22] That makes sense. Should further increased exchange adoption for each asset. [14:22] hmm yeah its just easier for wallet integration because its basically the same as rvn and bitcoin but for a specific asset [14:22] so this is in specific mind of exchange listings for assets i guess [14:23] if i understand rightly [14:23] @traysi Gut feel is to allow ravend to handle a few different assets on different threads. [14:23] Are you going to call it kawmeleon mode? [14:23] Lol [14:23] I read that as kaw-melon mode. [14:24] same lol [14:24] so in one single swoop it possible to create a specific wallet and server daemon for specific assets. great. this makes it easier for exchanges, and has some added advantages with processing data too right? [14:24] Still keeping a RVN balance in the wallet, as well, Tron. How will that work is sendtoaddress sends the token instead of the RVN? A receive-RVN/send tokens-only wallet? [14:25] @traysi Yes [14:25] sendtoaddress on the other port (non RVN port) would send the asset. [14:25] This will be a hugely useful feature. [14:25] ^ [14:26] @Tron currently rpc function not support getaddresses senttowallet and this has to be done in ravencore lib, will this change you propose improve this situation [14:26] Config might look like {"port":2222, "asset":"FREE_HUGS", "rpcuser":"hugger", "rpcpass":"gi3afja33"} [14:26] how will this work cross-chain? [14:28] @push We'd have to go through the rpc calls and work out which ones are supported in compatibility mode. Obviously the mining ones don't apply. And some are generic like getinfo. [14:28] ok cool 👍 cheers [14:29] for now we continue using ravencore lib for our plans to keep track i just wondering if better way [14:29] as we had some issue after realising no rpc function for getting addresses of people who had sent rvn [14:29] @push | ravenland.org all of the node explorer and ravencore-lib functionality is based on RPC (including the addressindex-related calls). Nothing you can't do with RPC, although I'm not sure of the use cases you're referring to.. [14:29] interesting, so ravencore lib is using getrawtransaction somehow [14:29] i thought this may be the case [14:29] that is very useful thankyou for sharing this [14:30] look into addressindex flag and related RPC calls for functions that operate on addresses outside your wallet [14:30] thank you that is very useful, tbh i am not very skilled programmer so just decoding the hex at the raven-cli commandline was a challenge, i shall look more into this, valued information thanks as this was a big ? for us [14:31] Ok, things have gone quiet. New topic. [14:31] IPFS (integration) [14:31] GO [14:33] ... [14:33] <[Dev] Blondfrogs> So, we have been adding ipfs integration into the wallet for messaging. This will allow the wallets to do some pretty sweet stuff. For instance, you will be able to create your ipfs data file for issuing an asset. Push it to ipfs from the wallet, and add the hash right into the issuance data. This is going to allow for a much more seamless flow into the app. [14:34] <[Dev] Blondfrogs> This ofcourse, will also allow for users to create messages, and post them on ipfs and be able to easily and quickly format and send messages out on the network with ipfs data. [14:34] It will also allow optional meta-data with each transaction that goes in IPFS. [14:34] will i be able to view ipfs images natively in the wallet? [14:34] <[Dev] Blondfrogs> Images no [14:34] We discussed the option to disable all IPFS integration also. [14:35] @russ (kb: russkidooski) Probably not. There's some risk to being an image viewer for ANY data. [14:35] No option in wallet to opt into image viewing? [14:35] cool so drag and drop ipfs , if someone wanted to attach an object like an image or a file they could drag drop into ui and it create hash and attach string to transaction command parameters automatically [14:35] We could probably provide a link -- with a warning. [14:35] nomore going to globalupload.io [14:35] :ThinkBlack: [14:35] I understand that the wallet will rely on globalupload.io. (phase 1). Is it not dangerous to rely on an external network? Or am I missing something? [14:36] hmm [14:36] interesting, i suppose you could hash at two different endpoints and compare them [14:36] if you were that worried [14:36] and only submit one to the chain [14:36] You will be able to configure a URL that will be used as an IPFS browser. [14:36] Oh ic [14:36] you wont flood ipfs because only one hash per unique file [14:36] <[Dev] Blondfrogs> There are multiple options for ipfs integration. We are building it so you can run your own ipfs node locally. [14:36] <[Dev] Blondfrogs> or, point it to whatever service you would like. e.g. cloudflare [14:36] this is very cool developments, great to see this [14:37] Just like the external block explorer link currently in preferences. [14:37] @[Dev] Blondfrogs what about a native ipfs swarm for ravencoin only? [14:37] We have discussed that as an option. [14:37] @push | ravenland.org Considering having a fallback of upload through globalupload.io and download through cloudflare. [14:37] <[Dev] Blondfrogs> @russ (kb: russkidooski) We talked about that, but no decisions have been made yet. [14:37] yeah, i would just use two endpoints and strcompare the hash [14:37] as long as they agree good [14:37] submit tran [14:38] else 'potentially mysterious activity' [14:38] ? [14:38] if you submitted the file to ipfs api endpoints [14:38] Will the metadata just be a form with text only fields? [14:39] and then you would get 2 hashes, from 2 independent services [14:39] that way you would not be relying on a central hash service [14:39] and have some means of checking if a returned hash value was intercepted or transformed [14:39] i was answering jeroz' question [14:40] about relying on a single api endpoint for upload ipfs object [14:40] We have also kicked around the idea of hosting our own JSON only IPFS upload/browse service. [14:41] I have a service like this that is simple using php [14:41] we only use it for images right now [14:41] but fairly easy to do [14:41] Yup [14:42] Further questions about IPFS? [14:43] contract handling? file attach handling? or just text fields to generate json? [14:44] trying to get an idea of what the wallet will offer for attaching data [14:44] Probably just text fields that meet the meta-data spec. [14:44] ok noted [14:44] What do you mean by contract handling @sull [14:45] We won't prevent other hashes from being added. [14:45] asset contract (pdf etc) hash etc [14:45] <[Dev] Blondfrogs> also, being able to load from a file [14:45] got it, thanks [14:47] Let's do some general Q&A [14:48] Maybe just a heads up or something to look for in the future but as of right now, it takes roughly 12 hours to sync up the Qt-wallet from scratch. Did a clean installation on my linux PC last night. [14:48] Any plans or discussions related to lack of privacy of asset transfers and the ability to front run when sending to an exchange? [14:48] ^ [14:48] Is there a way to apply to help moderate for example the Telegram / Discord, i spend alot of time on both places, sometimes i pm mods if needed. [14:49] Any developed plans for Asset TX fee adjustment? [14:49] also this^ [14:49] @mxL86 We just created a card on the public board to look into that. [14:49] General remark: https://raven.wiki/wiki/Development#Phase_7_-_Compatible_Mode = updated reflecting Tron's explanation. [14:49] @mxL86 That's a great question. We need to do some profiling and speed it up. I do know that the fix we added from Bitcoin (that saved our bacon) slowed things down. [14:50] Adding to @mxL86 the sync times substantially increased coinciding with the asset layer activation. Please run some internal benchmarks and see where the daemon is wasting all its cycles on each block. We should be able to handle dozens per second but it takes a couple seconds per block. [14:50] @BW__ no plans currently for zk proofs or anything if that's what you're asking [14:50] You are doing a great job. Is there a plan that all this things (IPFS) could be some day implemented in mobile wallet? Or just in QT? [14:50] i notice also that asset transactions had some effect on sync time as we were making a few. Some spikes i not analysed the io and cpu activity properly but will if there is interest [14:51] we are testing some stuff so run into things i am happy to share [14:51] @BW__ Might look at Grin and Beam to see if we can integrate Mimble Wimble -- down the road. [14:51] yeees [14:51] @J. | ravenland.org work with the telegram mods. Not something the developers handle. [14:51] i love you [14:51] @J. | ravenland.org That would be best brought up with the operators/mods of teh telegram channel. [14:51] @corby @Tron thnx [14:51] @S1LVA | GetRavencoin.org we're planning on bumping fees to... something higher! [14:51] no catastrophic failures, just some transaction too smals, and mempool issues so far, still learning [14:52] @corby i thought that this may happen :ThinkBlack: [14:52] @corby x10? 100x? 1000x? Ballpark? [14:52] Definitely ballpark. [14:52] 😃 [14:52] 😂 [14:52] Is a ballpark like a googolplex? [14:53] @push | ravenland.org asset transactions are definitely more expensive to sync [14:53] yes yes they are [14:53] they are also more expensive to make i believe [14:53] 10,000x! [14:53] as some sync process seems to occur before they are done [14:53] @traysi ★★★★★ thanks for the suggestions we are going to be looking at optimizations [14:53] But, it is way slower than we like. Going to look into it. [14:53] i do not understand fully its operation [14:53] 1000x at minimum in my opinion [14:53] its too easy to spam the network [14:54] yes there has been some reports of ahem spam lately [14:54] :blobhide: [14:54] 😉 [14:54] cough cough ravenland [14:54] @russ (kb: russkidooski) we're in agreement -- it's too low [14:54] default fee 0.001 [14:54] ^ something around here [14:54] @corby yep we all are i think [14:55] waaay too low [14:55] meaningful transactions start with meaningful capital expense [14:55] though there is another scenario , there are some larger volume, more objective rich use cases of the chain that would suffer considerably from that [14:55] just worth mentioning, as i have beeen thinking about this a lot [14:55] there are some way around, like i could add 1000 ipfs hashes to a single unique entity, i tested this and it does work [14:56] @russ (kb: russkidooski) What would you suggest. [14:57] I had a PR for fee increase and push back. [14:57] Ignore the push back. 0.001 RVN is not even a micro-farthing in fiat terms [14:57] definitely around 1000x [14:57] Vocal minority for sure [14:57] ^ yep [14:57] @russ (kb: russkidooski) That sounds reasonable. [14:57] Couple hundred Fentons [14:58] right now an asset transaction is 0.01 of a penny essentially [14:58] 1 RVN would work now, but not when RVN is over $1. [14:58] yes exactly [14:58] Hi. Late to the party. [14:58] We are also talking about a min fee. The system will auto-adapt if blocks fill up. [14:58] im thinking tron, some heavy transaction use cases would fall out of utility use if that happened [14:58] so whats the thinking there [14:59] is there a way around the problem, bulked ipfs hash transactions? [14:59] 1000x would put us around btc levels [14:59] maybe a minimum 500x? [14:59] @russ (kb: russkidooski) Agreed. [14:59] <[Dev] Blondfrogs> It is time to wrap it up here. Everyone. Thank you all for your questions and thoughts. We will be back in 2 weeks. 😃 [14:59] Small increase and review. [14:59] Thanks all! [14:59] Cheers. [15:00] yeah sorry for 1 million questions guys hope i didnt take up too much time [15:00] cheers all 👍 [15:00] Thanks everyone [15:00] Thanks everyone for participating!!! [15:00] That is what we are here for [15:00] 100x-500x increase, 1000x maximum [15:00] 🍺

submitted by Chatturga to Ravencoin [link] [comments]

04 Downloading Blockchain To Speed Synchronize - YouTube Syncing your Bitconnect QT wallet NEW updated 10/27/2018 How To Quickly Sync A Wallet with Bootstrap (Litecoin/Bitcoin) Get your Bitcoin Core Wallet Up and Running Link in Duscription Bitcoin Core Wallet sync 100% result

I just downloaded Bitcoin-QT and requested money on an address through the "Receive" tab. My friend sent it and it's not showing up since Bitcoin is taking too long to sync. My Internet connection is really fast and downloads at 100 MBPS. If this is how Bitcoin works then no wonder it's not used by a lot of businesses. How can I speed it up? At ... Installation: Download wallet: Check your address: File -> Receiving address Now you can start mining to this address How to set up miner: 3. Make … How to Speed Up New Bitcoin Wallet Synchronization 21 Jan 2014. w. If you are just getting into Bitcoins and started by installing the Bitcoin wallet on your computer you may notice that the synchronization process with the Bitcoin network is taking up quite some time. This is due to the very large blockchain that has been generated so far and it will continue to grow even bigger, so besides ... The biggest pain point of using Bitcoin-Qt (Bitcoin Core) prior to v 0.10 as your wallet is it takes forever to sync to get the complete block chain. A fully functioning node must have the Bitcoin-Qt (Bitcoin Core) client on a machine instance with the complete block chain.Note that this speed-up tip will no longer be necessary for Bitcoin Core version 0.10 (click here for Bitcoin Core version ... Bitcoin, Dash, Litecoin and every Altcoins has its own core wallet. While the looks of each and every wallet may vary slightly its functionalities remain the same. Whenever you open your QT wallet the first thing your wallet does is; it starts scanning all the recent blocks on the blockchain and tries to catch up with the network. Whether your wallet is a fresh install or you’ve been using ...

[index] [51550] [8636] [49154] [33836] [4638] [23739] [45223] [35119] [31524] [18052]

04 Downloading Blockchain To Speed Synchronize - YouTube

How to sync Reddcoin wallet faster - Issues/ problems ... GadgetHero 3,749 views. 7:17. How to Recover Missing Bitcoins / Not Showing Up While Wallet Syncing - Duration: 7:03. m1xolyd1an 36,668 ... Download your QT wallet here https://github.com/bitconnectcoin/bitconnectcoin/tree/master/setup Get your Node List here https://chainz.cryptoid.info/bcc/#!ne... Downloading Blockchain to speed synchronize (Windows) Just to show how Bitcoin Core Wallet after done sync 100% to learn how to install just click this link i give thanks... https://youtu.be/h--qz2yupDQ. Bitcoin-QT wallet review - Duration: 8:53. Secure Your Wallet 5,137 views. 8:53. ... How to Recover Missing Bitcoins / Not Showing Up While Wallet Syncing - Duration: 7:03. m1xolyd1an 40,077 views ...

#